Our website uses cookies to continuously improve your experience and display content geared to your interests. By using our website and services, you
agree to our use of cookies.
NuPost and ecoPost brand postage meter cartridges by Clover, deliver exceptional quality and performance at a great price. These extensive product lines support over 90% of demand in today's market and are fully compatible with the most popular postage meters including Pitney Bowes, Quadient and Francotyp Postalia (FP Mailing Solutions).
1-year warranty with 100% performance guarantee
Won’t void service contracts because ink is approved and tested for the life of the cartridge
For use with Pitney Bowes DM300c, DM400c, DM450c, DM475c, G900, SendPro C Auto, 9H00 postage meters
Meets or surpasses OEM Indicia or Impressions: 8800 | Color: Red
Please follow these instructions to install your new cartridge
Open the top cover.
Select "Replace Ink Tank" on the front panel.
When the ink tank is in position, open the hold down latch and remove the old cartridge.
Remove the foil seal on the bottom of the new cartridge.
Install the new cartridge and close the hold down latch.
Close the cover of the meter to complete the installation.
If the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.
It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If you have installed a new postal meter and the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.
It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If your postage machine is producing poor impressions, you may need to run a cleaning cycle or purge.
Please keep in mind that this process may vary by machine and that you may consult your machine’s user manual for instructions on performing a cleaning cycle.
To begin press the Menu button.
Select Maintenance.
Select Printer Maintenance.
Select Clean Printer Nozzle.
You will see a choice of four purges. Selecting Purge C is usually enough to purge the system.
The system will begin a purge which may take a few moments. When the purge is finished, the screen will display Cleaning Complete.
Select Print Test Pattern to print a test pattern.
Follow the prompts to print the test pattern on an envelope or tape strip.
When the test pattern has been printed, the system will display prompts asking if the test pattern is OK. A poor test print will contain missing lines whereas a good test print will not.
If yes, select Yes and the Home screen returns
If no, select No, Clean Nozzle and the system will execute a purge. This may take a few moments. When finished, the screen displays: Cleaning Complete.
Select Done to return to the Printer Maintenance menu
If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing. Or you may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.
Select Another Purge to choose a different purge
Select Done to return to the Printer Maintenance menu
If the print quality still hasn’t improved, you may need to replace the machine’s printhead.
Please follow these instructions to install your new cartridge
Open the top cover.
Select "Replace Ink Tank" on the front panel.
When the ink tank is in position, open the hold down latch and remove the old cartridge.
Remove the foil seal on the bottom of the new cartridge.
Install the new cartridge and close the hold down latch.
Close the cover of the meter to complete the installation.
If the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.
It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If you have installed a new postal meter and the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.
It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If your postage machine is producing poor impressions, you may need to run a cleaning cycle or purge.
Please keep in mind that this process may vary by machine and that you may consult your machine’s user manual for instructions on performing a cleaning cycle.
To begin press the Menu button.
Select Maintenance.
Select Printer Maintenance.
Select Clean Printer Nozzle.
You will see a choice of four purges. Selecting Purge C is usually enough to purge the system.
The system will begin a purge which may take a few moments. When the purge is finished, the screen will display Cleaning Complete.
Select Print Test Pattern to print a test pattern.
Follow the prompts to print the test pattern on an envelope or tape strip.
When the test pattern has been printed, the system will display prompts asking if the test pattern is OK. A poor test print will contain missing lines whereas a good test print will not.
If yes, select Yes and the Home screen returns
If no, select No, Clean Nozzle and the system will execute a purge. This may take a few moments. When finished, the screen displays: Cleaning Complete.
Select Done to return to the Printer Maintenance menu
If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing. Or you may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.
Select Another Purge to choose a different purge
Select Done to return to the Printer Maintenance menu
If the print quality still hasn’t improved, you may need to replace the machine’s printhead.
A small electrical patch containing contacts which stores information for interaction between the cartridge and the printer. Not all inkjet cartridges have a chip. Most inkjet cartridges contain a flexible ribbon (called a "flex ribbon") that contains the information for interaction with the printer.
A plastic part used to protect the contacts and nozzle plate during transportation and before use.
A cartridge that is made entirely of new components to resemble the OEM. Sometimes the cartridge only resembles the OEM on the exterior however most cases resemble the OEM both internally and externally.
A series of copper squares that makes contact and communicates with the printer.
The portion of the printer where the inkjet cartridges are installed. This device also carries the inkjet cartridges back and forth across the page creating the desired image.
Prints blue shades
Dye based inks are typically found in color cartridges; however, there are some cases where black cartridges are dye based (photo blacks are dye based). Dye based inks are not water proof or water resistant. They are available in a variety of shades which aids in the color matching to the OEM.
A cartridge that contains foam in one or more areas of the cartridge. The foam acts as a sponge holding the ink in the cartridge however adequately releasing the ink as needed when the space becomes available in the ink reservoir.
An integrated inkjet cartridge has a nozzle plate (printhead) installed on the cartridge along with an electric flexible ribbon connecting the nozzle plate to the electrical contact that interact with the printer.
Prints red shades
A non-integrated inkjet cartridge does not have a nozzle plate included on the cartridge. The nozzle plate for these types of cartridges is included in the printer. The printhead is a consumable item; in some cases, however, in others the printhead is not replaceable. In most cases the chip can be replaced on these style cartridges allowing them to respond to the printers exactly like the original.
Consists of a series of tiny holes that eject ink to form an image or text when instructed to do so by the computer through communication of the chip or flex ribbon.
Original Equipment Manufacturer; the brand new product produced by the company that produced the printer (i.e. HP, Lexmark, Dell, etc)
At times, OEM manufacturers make updates to ink cartridges and/or printer firmware that will cause printers to produce an error message that states “older generation” upon the installation of a cartridge. This firmware update requires that a customer purchase an OEM for their printer or insert a “newer generation” cartridge in order for the printer to function properly. This affects OEM as well as remanufactured cartridges. Inkjet remanufacturers are able to stay on top of these updates and begin producing the “newer generation” cartridges as soon as possible. For more information on these updates, click here for the HP 61 series or click here for the HP 950/951 series.
Lighter shades of black which allows for more color combinations and more "life-like" photographs.
Lighter shades of blue which allows for more color combinations and more "life-like" photographs [i.e. better flesh tones]
Lighter shades of red which allows for more color combinations and more "life-like" photographs [i.e. better flesh tones]
To pull ink from the foam or ink reservoir down to the nozzles preparing them for printing. This is a regular operation performed by the printer, but can also be manually performed to aid in producing an acceptable print.
A cartridge that has no foam inside and consists either of a bag/lining or a series of channels and canals. Both of these mechanisms adequately dispense the ink at the correct rate.
Pigment based inks are typically found in black cartridges; however, there are some cases where color cartridges are pigment based (some Epson, Kodak, and some wide format printer applications). Pigment based inks are water resistant and fade resistant; however, they do not come in many shades so color matching to the OEM is difficult. Pigment based inks also have a higher cost associated with them than do the dye based inks.
An inkjet spittoon is a component in inkjet printers that collects the ink that is removed from the cartridge when the inkjet is primed. This spittoon (sometimes called a reservior) can be either a plastic tray or a piece of foam that absorbs the excess ink. Some of the ink can dry (which makes the foam not absorb as well), and the ink that isn’t absorbed sits in the bottom of the printer. This is how ALL inkjet printers work, which is why it is never a good idea to move an inkjet printer as there will more than likely be ink in the bottom (especially older printers or printers that are used a lot).
A cartridge that is foam based and contains 3 different colors of ink in one cartridge. Typically these colors of ink are Cyan/Magenta/Yellow however there are photo cartridges that contain Photo Cyan/Photo Magenta/Photo Black.
* Page yield based on 5% page coverage prints.
CLOVER’S NAME THE CHATBOT CONTEST
Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.
Recycled Content Certified
GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.
Low-Emissions Toner
Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.
2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.
Information
Information
Information
Payment Information
To use the Clover Recycling Center, you must provide a credit card which may be charged on a monthly basis to offset program costs. Charges will vary depending on the contents of your return shipments.
Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.
CLOVER’S NAME THE CHATBOT CONTEST
Payment Information
Thank you
