Clover Imaging Remanufactured High Yield Black Ink Cartridge for Canon CLI-251XL (6448B001)

  • Canon - 6448B001
  • Canon - 6448B001
  • Canon - 6448B001
  • Additional image
  • Additional image
  • Additional image

Clover Imaging Remanufactured High Yield Black Ink Cartridge for Canon CLI-251XL (6448B001)

  • 118033
  • Inkjet
  • Canon - 6448B001
  • CLI-251XL
  • Black
  • 4,425 Pages *
  • High Yield

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be contacted about purchasing Clover products.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information

Technical Specifications

Compatible with following printers:

Canon
  • PIXMA iP7220
  • PIXMA iP8720
  • PIXMA iX6820
  • PIXMA MG5420
  • PIXMA MG5422
  • PIXMA MG5520
  • PIXMA MG5522
  • PIXMA MG6320
  • PIXMA MG6420
  • PIXMA MG7120
  • PIXMA MX722
  • PIXMA MX922

Product Box Dimensions:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.35 lbs

Videos and Downloads

Product Related Videos:

  • High Quality - Environmentally Friendly Inkjet Printer Cartridges

Product Related Downloads:

Product Troubleshooting

Possible Troubleshooting

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Please also gently pull the tab on the front of the cartridge to help the cartridge fit into the printer properly.

Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error message stating that a cartridge is missing, damaged or cannot be recognized, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • When you open the printer lid, you will see that the cartridge that is not being recognized does not have a red light in front of it. Remove that cartridge from its cradle. 
  • Gently push out on the tab on the front of the cartridge. Reinstall the cartridge, and you should hear it "click" into place. 

If the cartridge is still not being recognized, remove the cartridge from its cradle again.

Confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.
  • To clean the chip you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle.

You should now see a solid red light in front of that cartridge. Close the lid, and any flashing lights should be gone.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to remove the pull tab from the top of the cartridge.

Next make sure you have properly removed the clip from the cartridge. The clip protects the nozzle on the cartridge and also keeps the cartridge from leaking.

Now your cartridge is ready to be installed into your printer.

Please keep in mind that there are various styles of clips and that the clip we are removing in this video may not be identical to the one on your cartridge. Clips will vary in color, size and shape depending on the cartridge model and supplier of your remanufactured inkjet.

If the cartridge is still not fitting into the machine after you have removed the clip, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.

If you have completed the steps outlined above and your cartridge is still not fitting into your printer, please follow the instructions listed for "My Cartridge Does Not Snap Into Place".

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have just installed a remanufactured cartridge and the ink levels display as low or empty, there may be a solution for this problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

  • If the chip is missing, you should return the cartridge to its place of purchase. 
  • If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error. 

To clean the chip you may use a pencil eraser.

  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
  • Once this is complete, replace the cartridge in the cradle. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

This can be done by turning off your computer and your printer with the cartridges installed. Unplug your printer and leave your machines off for 2 minutes. Restart the printer and your computer, and attempt your print again.

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you encounter a low ink message after the cartridge has been installed for a period of time, simply follow the directions displayed on your computer or printer screen to clear the error.
  • Often this is pressing and holding down the Stop/Reset or Resume button for 10 seconds. Once the error is cleared, you should replace your cartridge as soon as possible.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have removed the pull tab and clip from the cartridge but it does not "snap" into place, there is a simple solution to fix this.

  • Gently pull the tab on the front of the cartridge. 
  • Reinstall the cartridge, and you should hear it "click" into place. 
  • Follow any on-screen prompts that may appear. 

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

Please visit our Printer Compatibility page to determine which cartridge you need for your machine.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error message stating that a cartridge is missing, damaged or cannot be recognized, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • When you open the printer lid, you will see that the cartridge that is not being recognized does not have a red light in front of it. Remove that cartridge from its cradle. 
  • Gently push out on the tab on the front of the cartridge. Reinstall the cartridge, and you should hear it "click" into place. 

If the cartridge is still not being recognized, remove the cartridge from its cradle again.

Confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.
  • To clean the chip you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle.

You should now see a solid red light in front of that cartridge. Close the lid, and any flashing lights should be gone.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle, please do the following:

  • Double click the Canon Solution Menu on your desktop. 
  • Click on Change Settings or Find Solutions to Problems. 
  • Click on Troubleshooting. 
  • Click on Cleaning. 
  • Click Execute. 
  • You may also access this screen through your computer’s Control Panel. 
  • On your computer screen, press the Start Button. 
  • Select Printers and Faxes. 
  • Right click on your Printer Icon. 
  • Select Properties. 
  • Click on Properties. 
  • Click on Maintenance. 
  • Click Cleaning. 
  • Click Execute. 

You willnow observe your printer performing a cleaning cycle. 
  • When the cleaning cycle is complete, click Print Check Pattern. 
  • If the quality of the Check Pattern is satisfactory, click exit. 
  • If the quality is still unsatisfactory, you may choose to do a Deep Cleaning. 
  • Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer's LCD screen.

If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • On your printer's control panel, scroll to Settings and press OK 
  • Next scroll to Maintenance and press OK 
  • Scroll to Cleaning and press OK 
  • Select yes and press OK 
  • Follow any on-screen prompts that may appear. 

You will now observe your printer performing a cleaning cycle. 

When the cleaning cycle is complete, your printer will print a test page. 

Follow the instructions on your printer's LCD screen to finish the cleaning cycle. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If the quality on the test page is still unsatisfactory, you may choose to do a Deep Cleaning.

Please be aware that cleaning your printhead does consume ink; and therefore, it should only be completed when necessary.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Please also gently pull the tab on the front of the cartridge to help the cartridge fit into the printer properly.

Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error message stating that a cartridge is missing, damaged or cannot be recognized, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • When you open the printer lid, you will see that the cartridge that is not being recognized does not have a red light in front of it. Remove that cartridge from its cradle. 
  • Gently push out on the tab on the front of the cartridge. Reinstall the cartridge, and you should hear it "click" into place. 

If the cartridge is still not being recognized, remove the cartridge from its cradle again.

Confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.
  • To clean the chip you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle.

You should now see a solid red light in front of that cartridge. Close the lid, and any flashing lights should be gone.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to remove the pull tab from the top of the cartridge.

Next make sure you have properly removed the clip from the cartridge. The clip protects the nozzle on the cartridge and also keeps the cartridge from leaking.

Now your cartridge is ready to be installed into your printer.

Please keep in mind that there are various styles of clips and that the clip we are removing in this video may not be identical to the one on your cartridge. Clips will vary in color, size and shape depending on the cartridge model and supplier of your remanufactured inkjet.

If the cartridge is still not fitting into the machine after you have removed the clip, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.

If you have completed the steps outlined above and your cartridge is still not fitting into your printer, please follow the instructions listed for "My Cartridge Does Not Snap Into Place".

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have just installed a remanufactured cartridge and the ink levels display as low or empty, there may be a solution for this problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

  • If the chip is missing, you should return the cartridge to its place of purchase. 
  • If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error. 

To clean the chip you may use a pencil eraser.

  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
  • Once this is complete, replace the cartridge in the cradle. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

This can be done by turning off your computer and your printer with the cartridges installed. Unplug your printer and leave your machines off for 2 minutes. Restart the printer and your computer, and attempt your print again.

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you encounter a low ink message after the cartridge has been installed for a period of time, simply follow the directions displayed on your computer or printer screen to clear the error.
  • Often this is pressing and holding down the Stop/Reset or Resume button for 10 seconds. Once the error is cleared, you should replace your cartridge as soon as possible.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have removed the pull tab and clip from the cartridge but it does not "snap" into place, there is a simple solution to fix this.

  • Gently pull the tab on the front of the cartridge. 
  • Reinstall the cartridge, and you should hear it "click" into place. 
  • Follow any on-screen prompts that may appear. 

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

Please visit our Printer Compatibility page to determine which cartridge you need for your machine.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error message stating that a cartridge is missing, damaged or cannot be recognized, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • When you open the printer lid, you will see that the cartridge that is not being recognized does not have a red light in front of it. Remove that cartridge from its cradle. 
  • Gently push out on the tab on the front of the cartridge. Reinstall the cartridge, and you should hear it "click" into place. 

If the cartridge is still not being recognized, remove the cartridge from its cradle again.

Confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.
  • To clean the chip you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle.

You should now see a solid red light in front of that cartridge. Close the lid, and any flashing lights should be gone.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle, please do the following:

  • Double click the Canon Solution Menu on your desktop. 
  • Click on Change Settings or Find Solutions to Problems. 
  • Click on Troubleshooting. 
  • Click on Cleaning. 
  • Click Execute. 
  • You may also access this screen through your computer’s Control Panel. 
  • On your computer screen, press the Start Button. 
  • Select Printers and Faxes. 
  • Right click on your Printer Icon. 
  • Select Properties. 
  • Click on Properties. 
  • Click on Maintenance. 
  • Click Cleaning. 
  • Click Execute. 

You willnow observe your printer performing a cleaning cycle. 
  • When the cleaning cycle is complete, click Print Check Pattern. 
  • If the quality of the Check Pattern is satisfactory, click exit. 
  • If the quality is still unsatisfactory, you may choose to do a Deep Cleaning. 
  • Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer's LCD screen.

If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • On your printer's control panel, scroll to Settings and press OK 
  • Next scroll to Maintenance and press OK 
  • Scroll to Cleaning and press OK 
  • Select yes and press OK 
  • Follow any on-screen prompts that may appear. 

You will now observe your printer performing a cleaning cycle. 

When the cleaning cycle is complete, your printer will print a test page. 

Follow the instructions on your printer's LCD screen to finish the cleaning cycle. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If the quality on the test page is still unsatisfactory, you may choose to do a Deep Cleaning.

Please be aware that cleaning your printhead does consume ink; and therefore, it should only be completed when necessary.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.

* Page yield based on 5% page coverage prints.

CLOVER’S NAME THE CHATBOT CONTEST
Close

Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.

Recycled Content Certified
Close
Recycled Content Certified

GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.

Low-Emissions Toner
Close
Low-Emissions Toner

Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.

Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Close
Information
Close
Payment Information

To use the Clover Recycling Center, you must provide a credit card which may be charged on a monthly basis to offset program costs. Charges will vary depending on the contents of your return shipments.

View program terms and conditions

* Required Field
Notification
 
Close

 
Close

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Terms and Conditions
Close
Clover Video
Close
Warning
Close
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy
PROMOTION DETAILS
Close